Rembrandt Red Heart Beech 3 strip Lacquered 14x190x2525

Natural Grade engineered timber flooring. This allows for all the warm colours and natural variation of Beech to be displayed throughout your floor without knots. This factory finished board comes with Matt Lacquer finish for maximum protection. Ideal for residential and light commercial applications.

Engineered 3-Layer construction with a 4mm Wear layer.

Factory Applied Matt Lacquered Finish.

Suitable for Floating and Gluing installation. Chetham recommends CTC Silent Plus Rubber underlay for floating and TOVER Tovcol MS adhesive for glue down installation.

Boards are 2525mm long allowing for a split row in each pack.

The floor is compatible with underfloor heating. We recommend the use of TOVER MS POLYMER adhesive when installing this flooring over an underfloor heating system. The maximum surface temperature cannot exceed 27 degrees Celsius.

Sub-Floor must be dry and level. Maximum moisture content allowed for a normal concrete screed is 2%. Anhydrite or quick drying screeds must not exceed 0.05% moisture content. Special TOVER PRIMERS are recommended prior to installation of the flooring.