CTC European White Oak Herringbone Character Unfinished 20/6x100x500

Natural Grade engineered timber flooring for Herringbone pattern. This grade allows for all the warm colours and natural variation of Oak to be displayed throughout your floor. With the Character grade the knot size and sap wood is limited. This board is sanded in the factory ready for on site application of Lacquer or Oil. Ideal for residential and commercial applications.

Engineered Multi-Layer construction with a 6mm Wear layer.

Unfinished board ready to coat with Lacquer or Oil.

Suitable for Floating and Gluing installation. Chetham recommends CTC Silent Plus Rubber underlay for floating and TOVER Tovcol MS adhesive for glue down installation.

Boards are 100mm x 500mm.

The floor is compatible with underfloor heating. We recommend the use of TOVER MS POLYMER adhesive when installing this flooring over an underfloor heating system. The maximum surface temperature cannot exceed 27 degrees Celsius.

Sub-Floor must be dry and level. Maximum moisture content allowed for a normal concrete screed is 2%. Anhydrite or quick drying screeds must not exceed 0.05% moisture content. Special TOVER PRIMERS are recommended prior to installation of the flooring.