European Oak Prime Engineered Herringbone 20/6 x 100 x 500 mm Unfinished

This board is composed of 14 mm birch plywood with a 6 mm Oak veneer on top.

This Herringbone wood block floor comes unfinished ready for stains and lacquers. Chetham has a huge range of colours and various finishes available from TOVER such as Hard Wax oils, white washes, antique stains and many more. Lacquers are availabe in gloss, satin, matt or extra matt for unique finishes.

Traditionally all herringbone floors are installed by gluing each board to the sub floor. This can be done using an elastic glue such as TOVER Tovcol MS adhesive.

Herringbone floors are supplied in fixed lengths which are installed in left and right boards giving a traditional herringbone pattern.

One must comply with strict regulations when installing wood flooring over underfloor heating.
15 mm Solid herringbone is compatible with most underfloor heating systems provided it is correctly acclimatized and installed.

Sub-Floor must be dry and level. Maximum moisture content for a normal concrete screed is 2%. Anhydrite or quick drying screeds must not exceed 0.05% moisture content. Special TOVER PRIMERS are required prior to installation of the flooring if above tolerances are not met.