CTC Merbau Prime Plank Lacquered 14x180x2200

Prime Grade engineered timber flooring. This is a clear grade with a tint in the lacquer to enhance the beauty of the timber. No knots and almost no variation in colour. This factory finished board comes with Matt Lacquer finish for maximum protection. Ideal for residential and light commercial applications.

Engineered 3-Layer construction with a 4mm Wear layer.

Factory Applied Matt Lacquered Finish.

Suitable for Floating and Gluing installation. Chetham recommends CTC Silent Plus Rubber underlay for floating and TOVER Tovcol MS adhesive for glue down installation.

Boards are 2220mm long allowing for a split row in each pack.

The floor is compatible with underfloor heating. We recommend the use of TOVER MS POLYMER adhesive when installing this flooring over an underfloor heating system. The maximum surface temperature cannot exceed 27 degrees Celsius.

Sub-Floor must be dry and level. Maximum moisture content allowed for a normal concrete screed is 2%. Anhydrite or quick drying screeds must not exceed 0.05% moisture content. Special TOVER PRIMERS are recommended prior to installation of the flooring.